![]() ![]() 2ģ Specification CATEGORY Single YT L Double Input Signal 4 ~ 20mA DC *1 Impedance 250☑5Ω Supply Pressure 1.4 ~ 7.0kgf/cm 2 (20 ~ 100psi) Stroke 10 ~ 150mm *2 Air Connection 1/4 NPT Gauge Connection 1/8 NPT Conduit Entry 1/2 NPT CSA: Class 1, Zone 1, Group IIB, T5 Explosion Proof Protection IP66 Ambient Operating Temperature Linearity Hysteresis -40 ~ 60 C ☑.0% F.S 1.0% F.S Sensitivity ☐.2% F.S ☐.5% F.S Repeatability Air Consumption Flow Capacity Material Weight ☐.5% F.S 3LPM (Sup=1.4kgf/cm 2, 20psi) 80LPM (Sup=1.4kgf/cm 2, 20psi) Aluminum Diecasting 2.7 kg (6.1 lbs) * 1: For 1/2 Split Control, it can be applied by adjusting zero and span. At the point of balanced force exerted by the input signal and the feedback spring, the gap between the flapper (2) and the nozzle (3) will decrease, stopping the movement to the actuator. This movement is transferred to the cam (14) and pulls on the feedback spring (16). As the actuators inner pressure increases, the actuator stem (12) will move, pushing on the feedback lever (13). This allows air pressure to discharge through port OUT1 to the actuator (10). ![]() As a result, the spool (5) rises and simultaneously opens the seat (7). As the gap between the flapper (2) and the nozzle (3) increases, air pressure bleeds from the pilot valve (4) and the spool (5). Easy feedback connection.Ģ Operation Logic As the input signal is increased, the flapper (2) get pushed by the force of the torque-motor (1). Simple part change can set a 1/2 Split Range. PRODUCT DESCRIPTION Main Features and Functions It is designed for high durability and performance in high vibration environments. Improper or incorrectly performed maintenance also voids the Limited Warranty. The manufacturer warranty will be considered void should the product be subjected to abuse, faulty installation, lack of reasonable care, repair or service in any way, that is not contemplated in the documentation of the product, or if the model or serial number has been altered, tampered with, defaced, or removed damages that occur in shipment, due to the act of God, failure due to power surge, and cosmetic damage. If alterations or modifications are required, please contact - The manufacturer warrants the product from the original date of purchase for one (1) year, except as otherwise stated. The manufacturer is not liable for any damages or accidents as a result of alterations or modifications made to the product or parts. ![]() The manufacturer is not liable for any damages caused by the users negligence. The manual should not be duplicated or reproduced for any purpose without the approval of MANUFACTURER WARRANTY - For safety, it is imperative to follow instructions in the manual. Any changes in the product s specification, structure and/or any components may not result in an immediate revised version of the manual. The manual can be changed or revised without any prior notice. ![]() In order to fully utilize the product, we strongly recommend users to read this manual carefully. Each product is fully inspected after production to offer you the highest quality. 1 Product Manual CVS 1000L Electro-Pneumatic Linear Positioner INTRODUCTION Thank you for choosing the YT-1000L. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |